Showing 1–10 of 12 results

LIVA’S BORON

2.DESCRIPTION:

Thanks to its content of synthesizing ethanolamine added (C2H7NO) boron, LIVA'S®  BORON assists in elimination of hollow fruit formation, removal of plant cell wall deformations, and prevention of cracked and suberized body formations.

LIVA'S®  BORON also contributes to the carrying of sugar within plant and intake of water through cells.

It further affects photosynthesis and protein metabolism. Thanks to its special formulation, the phytotoxicity risk of Boron (B) is taken under control.

3.ADVANTAGES

Additionally, it makes contribution to the calcium remaining in dissolved state within cells.

LIVA'S®  BORON produces a high effect in case of use in drip irrigation, sprinkling and foliar applications.

If used in sprinkling, drip irrigation and foliar applications, LIVA'S®  BORON produces a high effect for other plant nutrients.

4.APPLICATION PLACE ; TIME AND DOSAGE

Low dosage is applied at light soil and high dosage is applied at heavy soil. The dosages as given under application per decare are based on the calculation of 1 ton of water.

If applied by sprinkler irrigation, add LIVA'S®  BORON  into the irrigation system at the last moments of irrigation and stop sprinkling while fertilizer is finishing. In this application, the dosages as stated in the table may be increased by one-fold.

IT CONTRIBUTES TO THE ABILITY OF WATER INTAKE BY CELLS

It is obvious that boron intake is higher in class dicotyledones. Therefore, one should make sure to apply LIVA'S®  BORON in the cultivation of, specifically, tomato, cucurbitaceae, vitaceae, rosaceae, fabaceae (beans, peas, etc.), spinach, lettuce, peppermint, pomegranate, citrus fruits, hazelnut, walnut, apple, apricot, plum, pear, sun flower.

No residue complications in plant; no spot and contaminaton on leafs, by LIVA'S®  BORON . Preharvest interval is (0) day’s between last application and harvesting. Where Bombus terrestris (earth bumblebee) has been used as a pollinator in greenhouse and outdoor crops, it will not be a problem when giving LIVA'S®  BORON  applications.

Crop Application Period Application Frequency Foliar Application (with 100 L water) Soil Application (per 1.000 m2)
Vineyard, Kiwi 1st application: At bud swell
2nd application: Before flowering
At 15-20 day intervals 90 – 100 cc 250 – 300 cc
Green Peas, Beans, Soy and Legumes Used when plants reach 10-15 cm in length. At 10-15  day intervals 75 – 100 cc 200 – 250 cc
Wheat, Barley, Rice At the tillering stage 50 – 100 cc 150 – 200 cc
Strawberry 1st application:  Before flowering
2nd application: 15 days after the first application
At 10-15  day intervals 75 – 100 cc 250 – 300 cc
Tomato, Pepper, Eggplant, Cucumber Applied during the period when plants grow 4-6 leaves. At 10 -day intervals 80 – 100 cc 250 – 300 cc
Beans, Chickpeas, Lentils Used when plants reach 10-15 cm in length. Throughout the period of development. At 15-20  day intervals 80 – 100 cc 250 – 350 cc
Hazelnut, Walnut, Pistachio, Almond Before flowering 100 – 125 cc 300 – 400 cc
Carrot Used when plants reach 10-15 cm in length. At 10-15  day intervals 125 – 150 cc 200 – 250 cc
Canola Used when the body starts expanding. 100 – 125 cc 250 – 300 cc
Watermelon, Melon, Zucchini 1st application: After planting seedlings
2nd application: 15 days after the first application
At 15- day intervals 75 – 100 cc 150 – 200 cc
Cherry, Sour Cherry, Peach, Apricot, Plum 1st application:  Before flowering
2nd application: After harvest
100 – 150 cc 250 – 300 cc
Cabbage, Brussels Sprouts, Cauliflower, Broccoli Applied during the period when plants grow 4-6 leaves. At 10-15 -day intervals 100 – 125 cc 200 – 250 cc
Lettuce, Leaf Lettuce Applied 10-15 days after emergence or transplantation. At 10-15  day intervals 50 – 75 cc 100 cc
Corn, Sunflower During and after the period when plants reach 15-20 cm in length. At 15-20  day intervals 75 – 100 cc 250 – 350 cc
Banana During flowering, birth and before harvesting. At 3-week intervals 100 – 150 cc 250 – 350 cc
Citrus Fruits After harvesting, before flowering. At 15-20 day intervals 80 – 100 cc 250 – 350 cc
Cotton Applied immediately before flowering. If necessary, the same dosage is re-applied after boll development. 80 – 100 cc 250 – 350 cc
Potato 1st application: 1 week after 100% emergence
2nd application: After 10-14 days
3rd application: During potato tuber formation
At 10-15 day intervals 80 – 100 cc 100 – 200 cc
Peach, Cherry, Apricot, Plum Used before flowering, while buds are coming up and in the period of pink bud, and also, after harvesting, before leaves are shed. 80 – 100 cc 100 – 200 cc
Onion, Garlic Used when sufficient foliar space is formed as convenient for spraying. 80 – 100 cc 150 – 250 cc
Sugar Beet, Turnip Applied during the period when plants grow 4-6 leaves. At 10-15 day intervals 80 – 100 cc 150 – 200 cc
Tobacco Applied twice at an interval of 15 days as of the beginning of field period. 80 – 100 cc
Green Areas Throughout the period of development 80 – 100 cc
Apple, Pear, Quince, etc. Used when buds burst and petals drop and after harvesting, before leaves are shed. Not used during the flowering period. 100 – 125 cc 150 – 200 cc
Olive Before and after flowering 80 – 100 cc 250 – 300 cc

 

5.MISCILIBITY

LIVA'S®  BORON is MIXABLE with all kinds of licensed fertilizers and agricultural pesticides, except for calcium and copper. Make sure to carry out a preliminary test before mixing with any other plant nutrition or protection products.

LIVA’S MAGNESSIUM

2.DESCRIPTION:

LIVA’S ®MAGNESSIUM is a fertilizer, including magnesium, suitable for crops with high needs of this element (eg, tomato, pepper, watermelon, etc.)

 

The use of LIVA’S ®MAGNESSIUM is recommended for:

 

The important role of magnesium in the process of photosynthesis and also constitutes a structural element of the chlorophyll molecule, while at the same time, it contributes to the improvement of the qualitative characteristics of the fruits.

 

 

3.APPLICATION:

 

General dosage: 200 to 400 cc / hl

 

Tomatoes – Cucumber – Pepper – Eggplant:        2 – 4 lt / Ha.

Pastéque – Melon:                                          2 – 4 lt / Ha.

Potato:                                                        2 – 4 lt / Ha after tuber formation

 

Follow the applications at the same dose as above.

1st request: with 1-3 lt / Ha

2nd request: with 2-4 lt / Ha

LIVA’S MANGAZINC 4

2.DESCRIPTION:

LIVA’S ®MANGAZINC 4 is a zinc and manganese deficiency corrector, formulated in a new and original way in agriculture, with excellent properties of stability and resistance to leaching.

The use LIVA’S ®MANGAZINC 4 is recommended for:

Prevent and correct progressive and prolonged symptoms due to Zn and Mn deficiencies of all cultures.

The deficiencies of manganese and zinc, which are the basic nutrients for the development of the plant, are removed and the development of the plant is provided at optimal levels. Basic tasks of manganese; It acts as a catalyst in the breathing of the plant. It plays a role in the metabolism of nitrogen. Increase photosynthesis.

The basic tasks of zinc; Is involved in the synthesis of proteins and peptides that are important in the development of the plant. It protects the cytoplasm, increases the resistance of the plant to cold, promotes the development of shoots, lack of rosettes in the leaves, elongation between nodes, the decrease in the number of buds

 3.APPLICATION:

LIVA’S ®MANGAZINC 4  is a product designed to be applied foliarly and via the soil in all crops. Preventive applications are recommended:

 

General dose: 200 to 500 cc / hl

 

In case of foliar application, the recommended dose is:

Citrus fruits 3-5 liters / Ha

Horticultural 2-4 liters / Ha

Flowers and ornamental plants 2-4 liters / Ha

Melon, strawberry, watermelon, vine 2-4 liters / Ha

Wheat, cotton, corn 2-4 liters / Ha

In case of application, in all crops, use during the whole cycle of 10-15 l / ha, in at least 3 applications.

LIVA’S MOLIBOR

2.DESCRIPTION:

LIVA’S ®MOLIBOR boron and molybdenum elements, from the planting phase of plants, especially in the flowering and pollination phases, through the life of all plants, are two elements that must be given a balanced way.LIVA’S ®MOLIBOR Ensures optimal metabolism of nitrates, ensuring good vegetative growth. It accelerates the photosynthetic translocation of the main endogenous (hormone) and exogenous active substances (agrochemicals, insecticides, fungicides, fertilizers, etc.) from the point of entry or synthesis of the plant to the sap channels through the cell membranes

The use of LIVA’S ®MOLIBOR is recommended for: Boron element, planting the plant, in all plants, is necessary to maintain the water balance, is necessary for cell division. Depending on this deficiency, the boron element is very important in plant structures. The use of boron in the early stages increases the endurance of the cell, so it blocks the damage caused by diseases and other damage. Boron decently affects the intake of phosphorus and calcium in plants in a good way. When lack of molybdenum and boron, root improvement decreases. In the absence of boron, there is a germination deficiency in the pollen powders. While lack of molybdenum, the flowers remain in place without flowering and the creation of pollen is obstructed. Molybdenum is an element that is needed, in pulses, for Rhizobium bacteria to bind the nitrogen element to the atmosphere and this situation has good effects on increasing the efficiency on the pulses. When the lack of molybdenum, the chlorophyll capacity decreases, since molybdenum is extremely necessary for the synthesis of chlorophyll.

 

3.APPLICATION:

Greenhouse products:

From the planting stage to the harvest, it can be applied several times from the leaf. Via drip irrigation system, it can be applied several times during the season 0.5-1.5 l / 1000 liters of water / ha to the foliage

Citrus:

This is applied in the spring. 1-2 more application in the season. 0.5-1.5 l / 1000 liters of water / ha foliar

Fruit with seed, apple, pear, quince, peach, apricot, plum;

 In the pink bud stage, until the fruit grows to the size of a walnut applied 1-2 times. 0.5-1.5 l / 1000 liters of water / ha foliar

Vineyard: Before flowering. By mixing at least 100 liters of water to be declared, applied by spraying on the leaves. 0.5-1.5 l / 1000 liters of water / ha foliar.

BADE’S IRON

2.DESCRIPTION:

BADE’S®IRON

EDDHA, abbreviation for ethylenediamine-N, N’-bis (2-hydroxyphenylacetic), is a chelate that protects nutrients from precipitation in the highest pH range (pH 4 – 9). EDDHA chelates are therefore suitable for alkaline and calcareous soils as well as soils with a high carbonate content.

They are mainly used for fertigation in the open field and the injection of soil. After dilution, they are suitable for all irrigation systems: drip, micro-jet and any localized injection system. Oligo Premium Iron EDDHA 6% can be used at any stage of the vegetative cycle.

Protection of micronutrients against precipitation in a moderate pH range (pH: 4-9)

High ortho isomer content: 4.2% ortho – ortho.

Water solubility easy and fast.

Suitable for fertigation in the field and injection into the soil. Also suitable for fertigation of high tech off-ground crops

Compatible with most water soluble fertilizers

Iron is essential for the enzymatic system and plant metabolism (photosynthesis and respiration). The enzymes involved include catalase, peroxidase, cytochrome oxidase and other cytochromes. In addition, it is part of the ferredoxin and is necessary for the reduction of nitrate and sulfate, and essential for the synthesis and maintenance of chlorophyll in plants. Iron is strongly associated with protein metabolism.

3.APPLICATION:

 

General dose: 3 to 5 kg / Ha

CITRUS: 2-3 applications

Young trees; 10-20 gr / tree        at the foot 1xphase of vegetative development

Adult trees: 40-100gr / tree         at the foot 1xSpring- 1xautomne

FRUIT

Young trees; 15-30 gr / tree         at the foot 2 applications

Adult trees: 30-80gr / tree           at the foot At the beginning of the vegetative recovery

LIVA’S ZINCON

2.DESCRIPTION:

LIVA'S®  ZINCON is a product formed as a complex through the special format included within the free zinc solution. Thanks to this complex consisting of molecules having a micronized structure comprising different sources, with zinc lying at the core, transition of zinc into plant can be more reliable and efficient

 

3.ADVANTAGES

LIVA'S®  ZINCON assumes the duties of preventing small and narrow leaf formation, avoiding premature defoliation, drying offshoots, ensuring proper tillering and eliminating unsteady fruit drop.

PREVENTS PREMATURE DUMP

LIVA'S®  ZINCON is produced in a form as to meet zinc deficiency in plants, and it is carried to the whole plant by also entering through roots and leaves in all kinds of soil applications regardless of the pH level.

It does not cause any inhibitory effect on drip irrigation, sprinkling and foliar applications in seedling, sapling and all kinds of plant growing.

 

4.APPLICATION PLACE ; TIME AND DOSAGE

General application dosage is 200 – 250 cc LIVA'S®  ZINCON per 100 liters of water and should be carried out as a layer BENEATH AND ON TOP OF LEAF. A minimum of two applications is recommended during a season in order to be able to fully observe the effect.

LIVA'S®  ZINCON produces a high effect in case of use in drip irrigation, sprinkling and foliar applications

LIVA’S COPPER 10

2.DESCRIPTION:

LIVA'S®  COPPER10 is a product formed as a complex through the special format included within the free copper solution. Thanks to this complex consisting of molecules having a natural structure comprising different sources, with copper lying at the core, transition of copper into plant can be very strong and fast-paced.

3.ADVANTAGES

As copper (Cu) enhances enzyme production in plants, it is an important element for plant physiology due to the formation of photosynthesis and carbohydrate, protein and lignin syntheses. It also works as a catalyst for other reactions. As a result of copper deficiency, it is observed, at branch end sections of plants, discolorations such as drying, greyish green color, whitening, and, even, significant losses, during the flowering period.

ENHANCES PLANT RESISTANCE

LIVA'S®  COPPER10 is produced in a form as to meet copper deficiency in plants, and it is carried to the whole plant by also entering through roots and leaves in all kinds of soil applications regardless of the pH level.

It does not cause any inhibitory effect on drip irrigation, sprinkling and foliar applications in seedling, sapling and all kinds of plant growing. It promotes resistance in plants.

4.APPLICATION PLACE ; TIME AND DOSAGE

General application dosage is 75 – 150 cc LIVA'S®  COPPER10 per 100 liters of water and should be carried out as a layer BENEATH AND ON TOP OF LEAF. A minimum of two applications is recommended during a season in order to be able to fully observe the effect.

If used in drip irrigation, sprinkling and foliar applications LIVA'S®  COPPER10 produces a high effect.

LIVA’S COPPER

2.DESCRIPTION:

LIVA'S®  COPPER is a product with a systemic action which can be conveniently used in cases whereby hard-to-solve infections within parts of plant (leaf, branch, body, transmission bundles, root collar, damages on fruit, seedling, sapling plantings, etc.) are intensively observed and which successfully reduces economic losses.

It is a product having the consistency of ink used against bacterial diseases and only applied through the soil. If applied at a quantity of 3 liters per decare on the surface of the earth three days before planting, it will eliminate many of the bacterial and fungal diseases in soil.  It will make the soil ready for planting with confidence. It will not leave any residue.

 

3.ADVANTAGES

Thanks to its rich organic active ingredients, LIVA'S®  COPPER is a product with a very special formulation having a systemic effect. It produces a very high synergistic effect if used together with licensed chemicals against, specifically, Fusarium branch drying, Verticillium wilt, Erwinia amylovora (fire blight), Pseudomonas syringae morsprunorum (branch burn in cherry), Venturia inaequalis (apple blackspot bruising), bacterial diseases in vegetables, root neck diseases (Pythium, Phytophthora, Rhizoctonia solani) and, especially, the disease Fusarium oxysporum f. sp. radicis.

LIVA'S®  COPPER is applied by way of direct plant bottom pouring in case of Fusarium and Verticillium. If vegetable seedlings and fruit tree saplings are planted after being dipped into the container as prepared, no problem will be observed for 3 – 4 weeks.

BADE’S IRONGO

BADE’S®IRONGO

For the rapid correction of iron deficiency in crops and ornamentals, the growth of negatively alkaline soils and limestone soils, high carbonate contents, etc., which has a negative impact on the availability of Fe in soil and the absorption of Fe per plant. BADE’S®IRONGO can be used to reduce the alkalinity of soils, making it possible to provide the natural elements and nutrients essential for the healthy cultivation of plants that develop under acidic conditions.It helps to correct chlorosis, the most effective on neutral or slightly acid soils.Always try to apply BADE’S®IRONGO on a dry day, but with an imminent rain – ideally not more than 12 hours (to avoid burning), moisture dissolves iron sulfate.

 

3.APPLICATION:

General Dosage: 200gr-300gr/hll

SOIL  APPLICATION

Drip irrigation:2-3 kg/ha for fruit crops / vegetables

BADE’S OLIGO

2.DESCRIPTION:

The defects which are mostly observed in vegetables and fruit such as in color, shape, taste, etc. are the visible signs of insufficient and unbalanced plant nutrition as reaching us. BADE'S OLIGO prevents the occurrence of specific deficiency symptoms in plants which cannot obtain any one or several plant nutrients they need for development.

All the trace elements of BADE'S OLIGO, as dissolved in water,can be applied through the leaves.Thanks to its structure with organic acid content, the desired results are obtained from applications safely and effectivelyby the plant.

BADE'S OLIGO has ​​a water soluble micro-granular structure. The application should be carried out at relatively cool times, which are the periods of high intake of the plants.

Application of trace elements should not be carried out through the leaves in severely diseased plants.

BADE'S OLIGO can be applied at low dosage 5 – 6 days after the application of chemicals.

3.APPLICATION:

Soil Application: BADE'S OLIGO can also be applied to soil when plants are very yellowish due to stress or disease and foliar application is not possible. Prepare the solution corresponding to 10 – 20 grams BADE'S OLIGO per 1 liter of water and apply at a dosage of 1 liter per square meter (m2). In a high pH soil(alkaline earth), you may add 3 – 4 Kg (NH4)2SO4 (ammonium sulfate) to each prepared mixture of 100 liters. The effect can be improved.

BADE'S OLIGO can also be applied through drip irrigation system. The application dosagemay be 250-500 grams per 1 ton of water at 10-15 day intervals.

General Principle: BADE'S OLIGO shows the most reliable effect when applied frequently in small doses. Applyduring the day,to wit, early morning or evening when there is intensive photosynthesis activity.

4.MISCILIBITY

BADE'S OLIGO+Mix MIXABLE with all kinds of licensed fertilizers and agricultural chemicals. Make sure to carry out a preliminary test before mixing with any other plant nutrition or protection products

PACKAGE: 1KG -5KG